Wattmon - Intelligent Remote Monitoring and Control

Wattmon helps you log data, monitor and control your devices over the Internet

REMOTE MONITORING

Access your data over the Internet using any browser or smart phone

LOG & CONTROL

Log data and control your devices with automated rules - no programming required!

VIEW & ANALYSE

View intuitive graphs to understand and troubleshoot your system easily






Where can Wattmon be used?



Keeps track of remaining capacity and battery health with options to automatically control charging.
Interface with Inverters and Power meters to log AC energy - monitor your grid tie solar inverter production remotely.
Control devices around your home or company automatically. Meet the Internet of Things!
Remotely monitor your AC & DC solar pumps including water flow rate and power
Monitor solar energy production and DC energy generated
Monitor wind speed or energy generation from your turbine
Measure temperature, pressure, humidity, irradiation, wind speed, rainfall and more
Monitor telecom tower batteries and automate charging

Features & Benefits



Highly Versatile
Lets you customise device to your exact needs with intuitive interfaces
Easy To Use
Allows non-programmers to configure and automate things
Web-Based
Accessible from your phone, tablet and pc through our proxy server from anywhere
Industry Compliant
Integrate new and existing devices easily using Modbus RTU & TCP
Local Storage
Securely store your data locally, control who can see it
Cloud Ready
Upload data to your own server or use our advanced cloud portal
Programmable
Write your own scripts in a built-in editor using uPHP to extend functionality

Testimonials

I don’t see anymore how it is possible to manage a solar system without the full monitoring and control provided by Wattmon, it is a small investment that makes the big one - of the solar system - finally 100% worth its value.
Didier / Auroville / India
I am very happy to be using a Wattmon; it is very practical and controls the charging, from the mains, of my battery bank during the night time, whenever the battery charge level falls below a certain level and stops the charging when it reaches another level. All these parameters are programmable and can even be managed remotely. As a result I believe my battery will have a longer and better life than otherwise. The Wattmon is being continuously improved and upgraded...it's a very necessary accessory to your solar power system.
Angad / Auroville / India
We have been impressed by the flexibility of the Wattmon, its simple programmability enabled us to use it for a complicated application that would otherwise have required designing our own device.
Mitra / Lumeter Networks / USA



How Can Wattmon Help You?




Versatile Solutions

Monitoring Hardware
Devices that let you get to your data remotely with minimal hassle
Cloud Portal
Find out how our cloud based portal can help you
Understand
Understand the Wattmon system quickly





Cell Phone Tower

Monitoring cell phone towers is simple with Wattmon - just plug it in to your battery bank at the tower, install the 3G dongle, and monitor the system from anywhere. Wattmon sensors can monitor individual cell voltages, ambient temperature,  and will calculate the state of charge of the battery bank. You can set triggers to email the administrator of system problems, or even to switch on a generator or charger when required.

Typically this could be used for 24V or 48V battery banks, but higher voltages can be monitored using the A5S1 module.

Data can be accessed directly from the Wattmon device, or exported to a server of your choice on a regular basis.  We also provide a paid subscription service which will collect your data and make it available online on the Wattmon server - contact us for pricing if you are interested.




News

Zero Feed and DG Protection

Zero Feed - The Why

In India many states experience frequent and crippling power cuts.  Solar rooftop systems are springing up everywhere, from small residential houses to large factories in attempt to save costs and in so doing reduce carbon emissions.  Many states have not modified their policies yet to allow feed in, which in turn means that all solar generation needs to be used within the premises.   This is fine when the installed capacity is much less than the average load, but when a larger solar plant is installed problems can and will occur when loads are less in peak solar hours and during weekends.

Zero Feed - The How

A power meter is installed at the incomer of the building, and is used as a reference to determine the active power load on the building.  This meter needs to be able to communicate with Modbus RTU.  The Wattmon device is connected to both the power meter and the inverters.  It will regularly poll the power meter to determine the active power.  As it reaches a threshold value that can be set by the user, it will ramp down the output power on the inverters using power control commands on Modbus RTU.  This will effectively limit the amount of generation dynamically so that exporting of power does not happen.

DG Protection - The Why

Diesel generators bridge the gap during power cuts and in some locations they are used 24/7.  When coupled with solar grid tie inverters, a saving of fuel can be achieved.  However, it is important to balance the amount of solar power generated so as not to trip the genset, which effectively means you need to maintain a certain minimum load on the generator at all times.

DG Protection - The How

A power meter is installed on the output of the genset, and connected to the Wattmon in the same way as with zero feed.  The Wattmon monitors the energy generated and if it drops below a set point, it will reduce the power of the inverters so as to ensure that the generator does not trip.  

Both these systems can be installed at the same site by using two power meters and some software customization which will allow the set points to vary based on whether grid energy is available or whether the system is running on the generator.

For more details on our system, please contact us.

 

Wattmon Is Going to Intersolar 2017

We are going to be at Intersolar Munich (May 31-June 2) and look forward to meeting you all there at stall B3.472!

We will be showcasing our two existing products, the WattmonPRO and WattmonMINI and launching our newest product, the WattmonMEGA.