Differences

This shows you the differences between two versions of the page.

--- hardware:wattmons:wattmonmega_intro [2019/02/25 04:46]
admin [WattmonMEGA Overview]
+++ hardware:wattmons:wattmonmega_intro [2019/07/09 04:14]
ruchir [Inputs and Outputs]
@@ Line 28: / Line 28: @@
 {{:hardware:wattmons:20190223_wattmonmega_modbus.jpg?nolink&350|}}
-If you are planning to monitor a battery bank with the [[hardware:wattmons|Wattmon]], you will require a current sensor device such as the [[hardware:modules:C252]] (25A) or [[hardware:modules:C1002]] (100A).
+If you are planning to monitor a battery bank with the [[hardware:wattmons|Wattmon]], you will require a current sensor device such as the [[hardware:modules:C252h]] (25A) or [[hardware:modules:C1002s]] (100A).
 See [[hardware:Modules]] for a list of the Modbus devices we have developed for any application (voltage, current, frequency, <tooltip title="Pulse Width Modulation">PWM</tooltip>, relay outputs, etc.).
@@ Line 60: / Line 60: @@
 ===OneWire Bus===
-WattmonMEGA has a Dallas OneWire bus that allows for DS18B20 temperature sensors to be connected. This can be used for ambient or battery temperature measurement. You can connect up to 8 sensors per device. See here for more information: http://wattmon.com/9-user-guide/113-onewire-temperature-sensor
+WattmonMEGA has a Dallas OneWire bus that allows for DS18B20 temperature sensors to be connected. This can be used for ambient or battery temperature measurement. You can connect up to 8 sensors per device.
+{{:hardware:wattmons:20190223_wattmonmega_1-Wire.jpg?nolink&250|}}
 ====Storage====

Wattmon Documentation Wiki

User Tools

Site Tools

Differences

Page Tools