User Tools
hardware:wattmons:wattmonpro_intro
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
hardware:wattmons:wattmonpro_intro [2018/09/07 09:23] jeff Multiple minor improvements |
hardware:wattmons:wattmonpro_intro [2021/09/13 05:57] (current) |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ======WattmonPRO Overview====== | ======WattmonPRO Overview====== | ||
| - | {{20151013_wattmonpro_20180831_screenshot_from_datasheet_.jpg? | + | {{20180906_wattmonpro_20180907_screenshot_from_datasheet_.jpg? |
| =====Wiring and Connections Diagram===== | =====Wiring and Connections Diagram===== | ||
| Line 12: | Line 12: | ||
| =====Connectivity===== | =====Connectivity===== | ||
| - | WattmonPRO has two ways of connecting to the Internet. The built-in 10 Mbps LAN can be connected directly to a laptop or router, and is used for setup and local monitoring (but can also be used for remote monitoring if the site has an Internet connection). The USB Host port works with a selected number of USB Cellular dongles (GPRS, 3G and 4G LTE), allowing both outbound and inbound data via the Internet. Although we provide instructions on configuring your local dongle, not all of them work. Need a compatible USB dongle for remote monitoring? Use one of our Huawei dongles, the [[hardware:accessories: | + | WattmonPRO has two ways of connecting to the Internet. The built-in 10 Mbps LAN can be connected directly to a laptop or router, and is used for setup and local monitoring (but can also be used for remote monitoring if the site has an Internet connection). The USB Host port works with a selected number of USB Cellular dongles (GPRS, 3G and 4G LTE), allowing both outbound and inbound data via the Internet. Although we provide instructions on configuring your local dongle, not all of them work. Need a compatible USB dongle for remote monitoring? Use one of our Huawei dongles |
| =====Hardware Features===== | =====Hardware Features===== | ||
| Line 32: | Line 32: | ||
| The inputs and outputs and their various applications are described below. | The inputs and outputs and their various applications are described below. | ||
| - | ===4 digital | + | ===4 Digital |
| Pins 16-19 are digital inputs. They are opto-isolated and can handle anywhere between 4 and 24V DC between the input pin and the DIGND pin. Pins 16-18 (DI1-DI3) can also be configured as pulse/ | Pins 16-19 are digital inputs. They are opto-isolated and can handle anywhere between 4 and 24V DC between the input pin and the DIGND pin. Pins 16-18 (DI1-DI3) can also be configured as pulse/ | ||
| - | ===4 digital | + | ===4 Digital |
| These are open collector type (using a ULN2003 chip) and can be directly connected to 12V relays (with external power supply) to control high power loads - they can handle up to 500mA per pin. | These are open collector type (using a ULN2003 chip) and can be directly connected to 12V relays (with external power supply) to control high power loads - they can handle up to 500mA per pin. | ||
hardware/wattmons/wattmonpro_intro.1536312212.txt.gz · Last modified: 2021/09/13 05:56 (external edit)
