User Tools
Sidebar
how_tos:mqtt_configuration
This is an old revision of the document!
MQTT Configuration
As of Firmware x.1311 onwards, we have added several more MQTT configuration parameters that can currently be configured through the INI located in /config/mqtt.ini.
In the [config] section you can set the following key/value pairs:
| Key | Value |
|---|---|
| enabled | 1 or 0 to enable/disable MQTT |
| debug | 1 or 0 to enable/disable debug logging |
| mqtt_timeout | Connect timeout in seconds before raising an error |
| mqtt_port | Remote port number (usually 1833) |
| mqtt_protocol | Protocol shared during connect. Can be 3 for MQTT v3.0 or 311 for MQTT v3.1.1 |
| enabled | 1 or 0 to enable/disable TLS security |
| mqtt_id | Connect ID. If it's blank the MAC address will be used |
| mqtt_server | Server host name |
| mqtt_user | MQTT connect username |
| mqtt_password | MQTT connect password |
how_tos/mqtt_configuration.1710126356.txt.gz · Last modified: 2024/03/11 03:05 by admin
