Wattmon Documentation Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

======A10 ADC Module======

{{ 20180907_a10.jpg?400|A10}}The A10 10-Channel ADC Module is one of the Modbus-compatible modules that can be used to measure up to 10 individual DC voltages in relation to the common ground rail. This can be used to measure a large number of items, such as individual battery voltages in a 48V pack, or to measure high voltage battery banks of up to 300V DC, and also the DC voltage from a solar panel.

It can be configured and controlled by any Modbus RTU master device over RS-485.

The A10 Module can be used for any application in monitoring DC Voltages, such as:
  * **Battery Monitoring** - Measure individual cell voltages for larger battery banks
  * **High-Voltage Monitoring** - Measure high-voltage batteries or solar panels
  * **Sensor Monitoring** - Measure instrumentation or analog weather sensors

[[a10_intro|Overview]] - Introduction to the features of the A10

{{a10_spec_sheet.pdf|DataSheet}}

Wattmon Documentation Wiki

User Tools

Site Tools

Page Tools