Differences

This shows you the differences between two versions of the page.

--- hardware:modules:c1002s [2019/02/26 07:01]
rsharma created
+++ hardware:modules:c1002s [2021/09/13 05:57]
@@ Line 1: / Line 1: @@
-======C1002s Current Sensor Module======
-{{ 20180907_c1002s.jpg?400|C1002s}}The C1002s 100A Current Sensor Module is one of the Modbus-compatible modules that can be used to measure bidirectional DC currents up to 100A and is ideal for off-grid setups. Using one channel to measure solar current and one channel for load current, it is possible to create a coulomb counting based algorithm to accurately estimate battery capacity.
-The current transformers are a bidirectional, hall effect, open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC currents in the range of 0—±150. The loop hole size is 21 mm.
-It can be configured and controlled by any Modbus RTU master device over RS-485.

Wattmon Documentation Wiki