This shows you the differences between two versions of the page.
hardware:wattmons:wattmonmini_intro [2018/09/07 09:07] jeff Multiple minor improvements |
hardware:wattmons:wattmonmini_intro [2021/09/13 05:57] |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | ======WattmonMINI Overview====== | ||
- | |||
- | {{20180906_wattmonmini-dc_20180907_screenshot_from_datasheet_.jpg? | ||
- | |||
- | =====Wiring and Connections Diagram===== | ||
- | {{20160813_wattmonmini-dc_topview_diagram_20180907_edited_screenshot_from_ac_datasheet_.png|Topview Connection Diagram (WattmonMINI DC)}} | ||
- | |||
- | =====Power Requirements===== | ||
- | |||
- | The input voltage range is 12-24V DC. It consumes less than 2 watts of power without accessory devices. | ||
- | |||
- | =====Connectivity===== | ||
- | |||
- | WattmonMINI has two ways of connecting to the Internet. The built-in 10 Mbps LAN can be connected directly to a laptop or router, and is used for setup and local monitoring (but can also be used for remote monitoring if the site has an Internet connection). The USB Host port works with a selected number of USB Cellular dongles (GPRS, 3G and 4G LTE), allowing both outbound and inbound data via the Internet. Although we provide instructions on configuring your local dongle, not all of them work. Need a compatible USB dongle for remote monitoring? Use one of our Huawei dongles, the [[hardware: | ||
- | |||
- | =====Hardware Features===== | ||
- | |||
- | ====Modbus RTU (RS-485)==== | ||
- | |||
- | An industry compliant RS-485 Modbus RTU interface is built in and the [[hardware: | ||
- | |||
- | For most applications only the RS-485 A and B lines need to be connected to the device to be monitored and controlled. For example, all the [[hardware: | ||
- | |||
- | * Delta (RPI Series) | ||
- | * Schneider (Conext TL,RL Series) | ||
- | * PowerOne (RS-485 Series) | ||
- | * Emerson (Liebert Series) | ||
- | * Kaco (RS-485) | ||
- | |||
- | Any AC Power Meter with Modbus output can be monitored: for example, the [[hardware: | ||
- | |||
- | In addition, if needed, the 5V and GND lines can be connected for device power. Although designed primarily for a two-wire connection to an RS-485 capable device, by modifying a Cat5 cable any of the Modbus devices we have developed (voltage, current, frequency, <tooltip title=" | ||
- | |||
- | ====Storage==== | ||
- | |||
- | A removable/ | ||
- | |||
- | WattmonMINI has 128 KB RAM (enough space for about 30 KB of added user variables and scripts). | ||
- | |||
- | There is also 8 KB of <tooltip title=" | ||